We manufacture Ladder type cable trays as per Nema Standard no VE-1 & relevant Indian Standards. The Ladder type cable trays can be fabricated out of 1.5 to 3 mm thick HR sheet and height may vary from 50 mm to 150 mm as per requirements of customers. Width of our product varies from 100 mm to 1500 mm. daga Power is the leading company of Ladder Type Cable Tray Manufacturer in Kolkata, West Bengal, Odisha, Jharkhand, Bihar – India.
The available standard finish are as follows:
- Red Oxide Painted
- Red Oxide & Finish Painted
- Powder coated
- Hot Dip Galvanized
Depending on the load-bearing capacities & no of cables that can be laid over each tray, we have classified ladder type cable trays under following categories:
- Light Duty Ladder Tray
- Medium Duty Ladder Tray
- Heavy Duty Ladder Trays
- Extra Heavy Duty ladder Trays
Our products have been supplied and installed in PSUs’ & Govt departments such as Coal India, CPWD, DAE, ESIC, GAIL, OPTCL, Oil India, SAIL, TATA Steel, WBSETCL, NMDC, KMRCL, NRL, etc. Our Private Sector Clients include Reputed Corporate Houses such as JSPL, JSW, Lafarge-Holcim Group, Aditya Birla Group, etc
Daga Power Ladder Type Cable Trays
We are the leading company of Ladder Type Cable Trays Manufacturer as per Nema Standard no VE-1 & relevant Indian Standards. The Ladder type cable trays can be fabricated out of 1.5 to 3 mm thick HR sheet and height may vary from 50 mm to 150 mm as per requirements of customers. The width of our product varies from 100 mm to 1500 mm.
We provide maximum ventilation and load-carrying strength Used in applications with intermediate support with long spans, for Power & Control Cables.
Ladder Type Cable Tray are fabricated out of Mild Steel Conforming to I.S. 1079; 1994 / I.S. 513; 1994
| Tray width (W) | RunnerHeight (H) | Runner Collar (C) | Rung Size | Rungs Interval | Rung Slot Size | Thickness (T) | Tray Length (L) | Finish |
| 100 mm to 1000 mm | 50 mm to 150 mm | 15 mm to 45 mm | 30×10 mm 35×15 mm 40×15 mm 50×15 mm 40×20 mm 50×20 mm | 250 mm or 300 mm | 30×10 mm Slot size Spacing 70 mm C/C 20×10 mm Slot size Spacing 35 mm C/C | 1.6 mm to 3.0 mm | 2500 mm or 3000 mm | Hot Dip Galvanized / Powder Coated / Red oxide Painted / Red oxide & Finish Enamel Painted |
Note:
If other than the above-mentioned widths are required the trays can be fabricated as per the specifications by the customers / customer’s consultants
Daga Power Ladder Type Cable Trays
Different Cross-Sectional Details of Ladder Trays
Equal C Type Welded
Bolted Type
Ladder Type Cable Trays Accessories
90 Horizontal Elbow
90 Vertical Outside Elbow
90 Vertical Inside Elbow
Horizontal Cross
Horizontal Tee
Equal Reducer
Left Hand Reducer
Right Hand Reducer
| Radius | Types of Bends | Degrees |
| 300/450/600/1000 mm or as per the choice of customers | Horizontal, Vertical (Inside/Outside) Tees (Equal & Un-equal), Cross, Reducers | 30, 45, 60, 90 for Bends |